|
Please enter a keyword or ID
|
|
|
Browse by category:
|
| Glossary |
|
Rear Projection Color TV Instruction Manual: Color Convergence Adjustment/Auto Convergence Adjustment
|
Color Convergence Adjustment
(R40W46, R40W46F, R45W46, R45W46F only)
Use this function to adjust the R-G-B color convergence while a
stable
signal is being received. When the TV is first installed or if it is
relocated, the picture may be unstable with three color ghosts
(red, green, blue). This problem can be solved by adjusting the
color convergence.
1. Press the menu button and then use up/down buttons to select
the Picture menu.
2. Press the right arrow and then use up/down buttons to select
Convergence.
3. Press the right arrow and then use up/down buttons to select 1 (all point
convergence) or 9 (9 point convergence) . If the + display
is not white and shows three color ghosts, the color
convergence needs to be adjusted. If the + display is
white, color convergence does not need to be adjusted.
4. Press the Gand then press the tv/video button.
The display button is selected in red or blue.
5. Only selecting 9 : Use the number (0~9) button to select the
position your want to adjust the convergence.
6. Use the up/down/left/right buttons to superimpose the + display
(red or blue) over the green+. It will be changed to yellow
or cyan.
7. When both red and blue + display is superimposed over
green, the + display changes to white.
8. Press the exit button to return to TV viewing. |
 |
|
|
Note: If the picture needs to be adjusted more 1 (all point
convergence) adjustment, you can adjust the 9 (9 point
convergence) for the position you want to adjust. |
|
|
|
Auto Convergence Adjustment
(R50W46 and R57W46 only)
When the TV is first installed or relocated, the picture may be
unstable and have three color ghosts (red, green, blue). This
problem can be solved with Auto Convergence. This function
can adjust the picture color convergence automatically if the
TV is receiving a stable signal.
1. Press the menu button and then use up/down buttons to select
the Picture menu.
2. Press the right arrow and then use up/down buttons to select
convergence.
3. Press the right arrow button to start auto convergence.
The color convergence order will be: blue, green, then red.
The auto convergence function takes about 60 seconds. |
 |
|
|
Notes: • Wait 20 minutes after turning on the TV before using Auto Convergence.
• Darken the room before adjusting color convergence. |
|
|
|
|
|
Article ID: 3229 |
Last updated: 26 Jun, 2008 |
|
|
|
Views: 8857
|
|
Comments: 0
|
|
|
|
Prev
|
|
Next
|
|
LG TV Quick Setup Guide
|
|
Rear Projection Color TV Instruction Manual: Picture Format...
|
Knowledgebase by LG Technical Support
